vs-16ctq...pbf series, vs-16ctq...-n3 series www.vishay.com vishay semiconductors revision: 25-aug-11 1 document number: 94146 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 schottky rectifier, 2 x 8 a features ? 175 c t j operation ? low forward voltage drop ? high frequency operation ? high purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance ? guard ring for enhanced ruggedness and long term reliability ? compliant to rohs directive 2002/95/ec ? designed and qualified according to jedec-jesd47 ? halogen-free according to iec 61249-2-21 definition (-n3 only) description this center tap schottky rectif ier series has been optimized for low reverse leakage at hi gh temperature. the proprietary barrier technology allows for re liable operation up to 175 c junction temperature. typical applications are in switching power supplies, converters , freewheeling diodes, and reverse battery protection. product summary package to-220ab i f(av) 2 x 8 a v r 60 v, 80 v, 100 v v f at i f 0.58 v i rm max. 7 ma at 125 c t j max. 175 c diode variation common cathode e as 7.5 mj anode 13 2 base common cathode 2 common cathode anode to-220ab major ratings and characteristics symbol characteristics values units i f(av) rectangular waveform 16 a v rrm 60 to 100 v i fsm t p = 5 s sine 850 a v f 8 a pk , t j = 125 c (per leg) 0.58 v t j range - 55 to 175 c voltage ratings parameter symbol vs- 16ctq060pbf vs- 16ctq060-n3 vs- 16ctq080pbf vs- 16ctq080-n3 vs- 16ctq100pbf vs- 16ctq100-n3 units maximum dc reverse voltage v r 60 60 80 80 100 100 v maximum working peak reverse voltage v rwm absolute maximum ratings parameter symbol test conditions values units maximum average forward current see fig. 5 per leg i f(av) 50 % duty cycle at t c = 148 c, rectan gular waveform 8 a per device 16 maximum peak one cycle non-repetitive surge current per leg see fig. 7 i fsm 5 s sine or 3 s rect. pulse following any rated load condition and with rated v rrm applied 850 a 10 ms sine or 6 ms rect. pulse 275 non-repetitive avalanche energy per leg e as t j = 25 c, i as = 0.50 a, l = 60 mh 7.50 mj
vs-16ctq...pbf series, vs-16ctq...-n3 series www.vishay.com vishay semiconductors revision: 25-aug-11 2 document number: 94146 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) pulse width < 300 s, duty cycle < 2 % repetitive avalanche current per leg i ar current decaying linear ly to zero in 1 s frequency limited by t j maximum v a = 1.5 x v r typical 0.50 a electrical specifications parameter symbol test conditions values units maximum forward voltage drop per leg see fig. 1 v fm (1) 8 a t j = 25 c 0.72 v 16 a 0.88 8 a t j = 125 c 0.58 16 a 0.69 maximum reverse leakage current per leg see fig. 2 i rm (1) t j = 25 c v r = rated v r 0.55 ma t j = 125 c 7.0 threshold voltage v f(to) t j = t j maximum 0.415 v forward slope resistance r t 11.07 m ? maximum junction capacitance per leg c t v r = 5 v dc (test signal range 100 khz to 1 mhz) 25 c 500 pf typical series inductance per leg l s measured lead to lead 5 mm from package body 8.0 nh maximum voltage rate of change dv/dt rated v r 10 000 v/s absolute maximum ratings thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 55 to 175 c maximum thermal resistance, junction to case per leg r thjc dc operation 3.25 c/w maximum thermal resistance junction to case per package r thjc 1.63 typical thermal resistance, case to heatsink r thcs mounting surface, smooth and greased 0.50 approximate weight 2g 0.07 oz. mounting torque minimum 6 (5) kgf cm (lbf ? in) maximum 12 (10) marking device case style to-220ab 16ctq060 16ctq080 16ctq100
vs-16ctq...pbf series, vs-16ctq...-n3 series www.vishay.com vishay semiconductors revision: 25-aug-11 3 document number: 94146 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - maximum forward voltage drop characteristics (per leg) fig. 2 - typical values of reverse current vs. reverse voltage (per leg) fig. 3 - typical junction capacitance vs. reverse voltage (per leg) fig. 4 - maximum thermal impedance z thjc characteristics (per leg) 1 10 0 2.5 1.0 1.5 v fm - forward voltage drop (v) i f - instantaneous forward current (a) 100 0.5 2.0 1000 t j = 175 c t j = 125 c t j = 25 c 0.1 1 10 100 0.01 0.001 0 v r - reverse voltage (v) i r - reverse current (ma) 20 60 8 0 100 40 0.0001 t j = 175 c t j = 150 c t j = 50 c t j = 75 c t j = 100 c t j = 125 c t j = 25 c 1000 0 40 100 100 v r - reverse voltage (v) c t - junction capacitance (pf) t j = 25 c 20 60 8 0 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) single p u lse (thermal resistance) 1 d = 0.75 d = 0.50 d = 0.33 d = 0.25 d = 0.20 10
vs-16ctq...pbf series, vs-16ctq...-n3 series www.vishay.com vishay semiconductors revision: 25-aug-11 4 document number: 94146 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - maximum allowable case temperature vs. average forward current (per leg) fig. 6 - forward power lo ss characteristics (per leg) fig. 7 - maximum non-repeti tive surge current (per leg) fig. 8 - unclamped inductive test circuit note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = 80 % rated v r applied 100 014 i f(av) - average forward current (a) allowable case temperature (c) 120 150 140 1 8 0 170 110 130 160 12 10 8 6 4 2 dc s qu are w a v e (d = 0.50) 8 0 % rated v r applied see note (1) 7 0 012 4 average power loss (w) i f(av) - average forward current (a) 246 8 10 1 2 3 5 6 d = 0.20 d = 0.25 d = 0.33 d = 0.50 d = 0.75 dc rms limit 1000 100 1000 t p - square wave pulse duration (s) i fsm - non-repetitive surge current (a) 100 10 000 10 at any rated load condition and w ith rated v rrm applied follo w ing s u rge c u rrent monitor high-speed s w itch d.u.t. r g = 25 + free w heel diode v d = 25 v l irfp460 40hfl40s02
vs-16ctq...pbf series, vs-16ctq...-n3 series www.vishay.com vishay semiconductors revision: 25-aug-11 5 document number: 94146 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per t/r minimum order quantity packaging description VS-16CTQ060PBF 50 1000 antistatic plastic tube vs-16ctq060-n3 50 1000 antistatic plastic tube vs-16ctq080pbf 50 1000 antistatic plastic tube vs-16ctq080-n3 50 1000 antistatic plastic tube vs-16ctq100pbf 50 1000 antistatic plastic tube vs-16ctq100-n3 50 1000 antistatic plastic tube links to related documents dimensions www.vishay.com/doc?95222 part marking information to-220ab pbf www.vishay.com/doc?95225 to-220ab -n3 www.vishay.com/doc?95028 spice model www.vishay.com/doc?95279 device code 6 2 4 3 5 7 16 c t q 100 pbf 1 vs- 2 - current rating (16 = 16 a) 3 - circuit configuration c = common cathode 4 - package t = to-220 5 - schottky ?q? series 6 - voltage rating 7 - pbf = lead (pb)-free and rohs compliant -n3 = halogen-free, rohs compliant, and totally lead (pb)-free 1 - vishay semiconductors product environmental digit 060 = 60 v 080 = 80 v 100 = 100 v
document number: 95222 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 08-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 to-220ab outline dimensions vishay semiconductors dimensions in millimeters and inches notes (1) dimensioning and tolerancin g as per asme y14.5m-1994 (2) lead dimension and fini sh uncontrolled in l1 (3) dimension d, d1 and e do not in clude mold flash. mold flash shall not exceed 0.127 mm (0.005" ) per side. these dimensions are measured at the outermost extremes of th e plastic body (4) dimension b1, b3 and c1 apply to base metal only (5) controlling dimensions: inches (6) thermal pad contour optional within dimensions e, h1, d2 and e1 (7) dimensions e2 x h1 define a zone where stamping and singulation irregularities are allowed (8) outline conforms to jedec to- 220, except a2 (maximum) and d2 (minimum) where dimensions are derived from the actual package outline symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.25 4.65 0.167 0.183 e 10.11 10.51 0.398 0.414 3, 6 a1 1.14 1.40 0.045 0.055 e1 6.86 8.89 0.270 0.350 6 a2 2.56 2.92 0.101 0.115 e2 - 0.76 - 0.030 7 b 0.69 1.01 0.027 0.040 e 2.41 2.67 0.095 0.105 b1 0.38 0.97 0.015 0.038 4 e1 4.88 5.28 0.192 0.208 b2 1.20 1.73 0.047 0.068 h1 6.09 6.48 0.240 0.255 6, 7 b3 1.14 1.73 0.045 0.068 4 l 13.52 14.02 0.532 0.552 c 0.36 0.61 0.014 0.024 l1 3.32 3.82 0.131 0.150 2 c1 0.36 0.56 0.014 0.022 4 ? p 3.54 3.73 0.139 0.147 d 14.85 15.25 0.585 0.600 3 q 2.60 3.00 0.102 0.118 d1 8.38 9.02 0.330 0.355 ? 90 to 93 90 to 93 d2 11.68 12.88 0.460 0.507 6 13 2 d d1 h1 q 13 2 c c d d 3 x b2 3 x b (b, b2) b1, b3 (h1) d2 detail b c a b l e1 lead tip e e2 ? p 0.014 a b m m 0.015 a b mm s eating plane c a2 a1 a a a lead assignments diode s 1. - anode/open 2. - cathode 3. - anode conforms to jedec outline to-220ab (6) (6) (7) (6) (7) e 2 x l1 (2) detail b s ection c - c and d - d view a - a ba s e metal plating (4) (4) c1 c (6) thermal pad (e) e1 (6)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
